|
|
|
|
Weight |
1.9 kg, including
batteries |
|
Dimensions |
187 x 286 x 64
mm |
|
Time
measurement |
Selectable 1s -
1/10s - 1/100s - 1/1000s; -1/10000s Speed: selectable m/s -
km/h - mph knots |
|
Resolution
measurement |
4 x
10-5s (1/25000 s) |
|
Display |
Graphic display,
display area 132 x 39mm 240 x 64 pixels, with software
regulation of contrast and backlight |
|
Time
base |
12.8MHz oscillator,
stability ±1 ppm between 20°C and +70°C |
|
Precision |
±0.0864 s/day for
outdoor temperatures between -20° and +70°C |
|
Operating
temperature |
-20° /
+70°C |
|
Power
supply |
Internal NiMh
batteries; external source c.c. 10~30V |
|
Battery
recharge |
Smart embedded
recharger (automatic discharging/recharging, double control of
charging) |
|
Battery
life |
>20 hours at an
average print rate of one time every 20 seconds. The
chronometer maintains synchronization with the time base
precision even when the device is switched off until the
batteries run out. (Starting with batteries that have half
their total charge, synchronization is maintained for more
than 25 days) |
|
Processor |
3 C-MOS 8 and 16
bit microprocessors |
|
Printer |
Thermal printer
Various font types available Speed: about 7 lines/s Works
with thermal paper |
|
Keyboard |
32-key keyboard
with waterproof film cover Start-Stop-Lap-Aux keys
Numerical keyboard 5 function keys 2 arrows for scrolling
times 2 keys for disabling inputs and 2 for locking and time
disactivation lines (stop line + one configurable line) key
for enabling/disabling/cancelling displayboard key for
selection of start/finish corrections key for winding paper
forward display backlight key |
|
Memory |
Approx. 60,000 time
events Retention of stored data when device is switched
off |
|
Connections |
Connections on
6-pole amphenol socket: Start, stop, lap and auxiliary
signal inputs (on both Ψ 4 mm jack plug socket and on the
amphenol socket) Connection to LinkPod system (max 80
auxiliary inputs totally insulated from chronometer power
supply)
REI2NET connection for communication with other
REI2 chronometers + 5V output stabilized to supply external
devices Serial RS 232/485 input/output for connection
to displayboards 2 high-velocity serial RS 232/485
inputs/outputs (up to 115.2 Kbit/s) for connection to PC
Analogical inputs for connection of sensors for air
temperature and humidity, and for snow temperature
Digital inputs/outputs for connection/command of external
devices (e.g. MicroSem starting light) 5-pole socket for
connection to Microgate LinkGate radio transmission system (up
to a maximum of 16 different signals and 16 instant
speeds)
Input for external power source and/or battery
recharge
|
